Performance chips are specifically designed for particular models keeping in mind the manufacturing year of the car. Auto Performance Chips can be further classified into three types which are enumerated in this article.
• Control Module is the power chip, which is plugged into the electrical system present under car’s hood. The basic function of this is to analyze the car’s performance, convey commands to the on-board computer. It is the mediator of data which is intercepted and further communicated to the on-board computer. After analyzing information received it makes required adjustments in air-fuel composition, timing of the ignition and other functions. These auto performance chips are highly effective as they are constantly plugged in and keep reading and interpreting the data available for the sensors. They also take into account the size of the engine, and type of transmission too. These have in-built wiring harness which can be easily plugged to the on-board computer with no need for soldering, drilling and splicing.
• Power programmer is power chip which is more like plug-in devices. Once plugged in, they behave as if asking a series of questions and accordingly reconfigure the on-board computer to give peak performance by setting up a series of new instructions for operating. They are not permanently installed generally, but just until the time you wish to use their qualities. Else, they can be just plugged-out and the normal version can be utilized. This is just a one-time requirement and after this, you may just discard this auto performance chip and experiment on others. All this will just take you around 10 minutes and no tools are required for this procedure. Not only will you have great tuning but also have the option of recalibrating the on-board computer of your vehicle according to your preferences. There are several companies in the market which produce good quality of power programmers which can be tried on the automobile despite any existing programmers running.
• System for Engine Management- This power chip can replace the specifications of the on-board computer of your automobile giving you better control. This chip is placed inside the engine compartment and then old computer is unplugged and the new computer plugged with these wires. This will immediately sync the EMS with the sensors of the vehicle giving it an access to all data available in the automobile. A greater control of the computer can be attained by replacing the computer system rather than reprogramming it. They give one the complete control of the sir-fuel ratio along with injector control, speed and also nitrous management options. You can even plug the laptop to the EMS in order to keep a tab on the performance levels and to set different settings. These are highly specialized chips which provide good tuning of the vehicle.
Article Directory : http://www.articlecube.com
