A chain link fence is a good way of creating boundaries around an location like your yard while still keeping the space open and being able to see all around. If you are looking for something to give privacy then a chain link fence is probably not the best selection for you unless you are going to plant hedging along the fence. But by itself a chain link fence is very poor for privacy since it is so open.
Installing a chain link fence may be really costly if you get a professional to do it however, with a little assistance it is something that you can do by yourself. Here are a few guidelines to help you install a chain link fence of your own.
Required Tools
Fencing
Post hole digger
Carpenter's level
Strong string and stakes
Required Materials
Fencing
Top rails
Terminal Posts
Line posts
Cement
Tension bars
Tension bands
Terminal post caps
Loop caps
Brace bands
Carriage bolts
Wire ties
Instructions
As with all other home improvement projects, the first step when installing a chain link fence is to check if you require any building and zoning permits before you put in your fence. As soon as this is worked out you may proceed. Use string and stakes to mark out the area where the fence will be. Locate your underground utilities and stake out the location they are in so you do not meddle with them.
Use the post hole digger to dig holes 8-10 inches wide with a even bottom and not a rounded one, in other words the posts need to sit flat in the hole. Secure your terminal posts first (corner, end and gate posts) and use the cement to hold them in place. Use the level to guarantee that the posts are straight and level.
Then, dig holes for the line posts no more than 10 feet apart, between the terminal posts, 4 inches shorter than the terminal posts and cement them into position as well; make sure they are also straight.
Next slip the tension and brace bands over each terminal post and set a post cap on the top. Put loop caps on the top of each line post and run the top rail through the loop caps. Use carriage bolts to secure the top rail to the brace band. Link the top rails together right around the area.
Finally unroll the chain link material on the ground along the fence line and slip a tension bar through the last link on the fencing. Lay the fencing against the posts and fasten the tension bar to the terminal post with the tension bands and carriage bolts. Use the wire ties to secure parts of the fencing to the top rail and keep it from sagging.
Tip
Terminal posts should be 2 inches taller than the fencing material while line posts ought to be 2 inches lower than the fencing material.
Article Directory : http://www.articlecube.com
Please visit these links for more information on How To Install A Chain Link Fence and this link for information on Install A Chain Link Fence
